The JERN®14 was developed to work with high quality subwoofers.
Therefore it is -6dB at 90 Hz. Our JERN®12 can be used without a subwoofer.
Due to less bass demanded from the woofer, the JERN®14 can play louder with less distortion than the JERN®12.
The JERN®14 is the new revolutionary compact speaker from JERN®. It is elegant and small, but it delivers High End audio quality. The keys to its performance are its shape, components and choice of materials.
The name JERN®
A new generation
The iron for the cabinet is refined from recycled materials and it is good for a lifespan of more than a century.
Sound quality is an assessment of the accuracy and enjoyability. Loudspeaker sound is all about transferring the sound waves from the loudspeaker drivers to you, and reducing disturbing vibrations and noises from the cabinet. Different materials give different vibration levels. Traditionally, loudspeakers are made from wood because of its low cost and ability to reduce vibrations.
JERN® aims for the perfect sound. This is the cornerstone in our design, components, choice of materials and production.
The JERN®12, JERN®14 and JERN® w8000 loudspeakers are made from our vibration absorbing grey cast Iron, which reduce vibrations up to 100 times better than Aluminium. Our cabinets are also much better than MDF and wood. This Iron is our key to the clear and clean sound, which the JERN® loudspeakers delivers.
JERN®14 DS Specification
|Design||Two way. Phase linear wide dispersion design. Sealed cabinet for best transient response. Dimensions 30 cm tall, 19,5 cm deep and 21 cm wide. Net weight 12,54 kg.|
|Drive Units||Scan-Speak woofer 5 1/4 inch 149 mm cast frame. Very smooth frequency response +- 2dB op to 9 kHz.
· Excellent Midrange Performance · Low Damping SBR Rubber Surround · Coated NRSC Fibre Glass Cone · Die cast Aluminium chassis vented below spider. Scan-Speak small 20 mm textile dome tweeter with a long excursion of +-0,7 mm, good for 6 dB / Octave phase linear filters. Sheep wool damping of the tweeter.
|Frequency response||90 – 20.000 Hz|
|Comments||These JERN®14 loudspeakers need to work with high quality subwoofers.
They are a very easy load for amplifiers.
|Crossover||The phase linear 6dB/octave custom-made crossover uses a Mundorf polypropylene capacitor and an air core coil. It delivers a fine 3D soundstage.|
|Amplifier requirements||25 – 150W / 8 Ohm Sensitivity (2.83V/1m) 88 dB Impedance 8Ω|